MACH3 CNC system software used to run the host computer (LPT port) and the peripheral portion of the machine electrical power signal processing. Can be applied: CNC engraving machine, CNC lathe, CNC plasma cutting machine, laser engraving machine, CNC milling machines, machining centers and other machine tools. MACH3 series with the host computer and software, thus becoming the most cost-effective CNC system.
1, the output and the input signal by the number of dedicated high-speed full-chip processing, the signal correction, zoom in, in addition to unnecessary interference signal so that the machine runs more stable.
2, the computer LPT port with other parts of the power supply isolated power supply, so that the computer can effectively isolate the machine room. Thus further ensuring security and stability. Make the computer more secure and machining data
3, a total of five input signals communicate with the host computer, all through the optical coupling isolation, including P11, P12 port for high-speed optical coupling isolation, can be used to access the spindle encoder, or hand wheel A, B equally demanding signal. Reserved for a 12V-OUT, 5V-OUT power output interface can be used to pick the Hall sensor switch, proximity switch supply those needs. There are five input ports can be set to: limit, the origin of the knife, start, stop, spindle speed input, MPG input, etc. Any one of five functions.
4, a total of 12 output signals are available. Can support up to six-axis control output. You can also choose only one of these or several axes to control. This 12 output ports is partly functional reuse. In use, an output port only when a function is used.
5, there are three possible ad hoc support MACH3 software programming control relays. By controlling the MACH3 software, you can control any one relay pass, off. Each relay has energized light, use more intuitive and convenient. These three relays can be used to control the liquid coolant, the coolant mist, opening and closing of the gas liquid coolants. Solenoid valve can also be used to control devices such as a power switch. P2 port for spindle, P3 port for coolant, P4 port can be defined.
6, the ad hoc high-speed optical coupling isolation to control the spindle speed. Can be output within 2.5KHZ PWM signal output for the parallel port P1. The interface board have a 0-10V PWM into a D / A circuits. Can be 0-10V output level to control some of the market only analog speed control inverter, thereby to control the spindle speed. Note that the PWM output with 0-10V output can only choose one. Can not be used simultaneously.
7, the interface board can be connected to common cathode or common anode output to stepper drives or servo drives (servo drive must support digital signal). 5V output levels.
8, wide voltage input supply :16-35VDC power supply. There are anti-reverse protection.
There are also two sets of output voltage terminal: There is 5V and 12V voltage, 100MA output capability.
9 Remarks: Interface board 5V and 12V voltage output current output capabilities to 200MA. Although if you want you can contact us.
1 x 6 Axis Interface Board
1 x USB cable
We can ship to most countries in the world from our CN warehouses (HK & SZ)
To estimate delivery times to your area, please refer to the table below.
Shipping Delivery Times
|Warehouse||Shipping type||Shipping fee||Estimated shipping time||Note|
|HK/CN||Airmail / EUB||Free||
7-15 business days(EUB)
15-30 business days
Order processing time :2-7 working days
|DHL||Calculated Automatic||3-5 business days|
|Registered airmail||$2||15-30 business days|
|EMS/UPS||---------||7-15 business days|