1. Products introduction :
no external power supply to increase the 5V power supply module , no matter how much the output connection can be stabilized at 5V, making the interface board is more stable, no software dropped, the stepper motor step away . (USB power 5V, only 500 mA , and the computer is different, there will be different before and after different computer interfaces , after connecting the stepper motor drives may only about 4.5V up ) , and now the interface board is to use the laptop battery can also work . So the blood supply interface board is working properly .
Use active crystal, single-chip stable to rely on him . Costs increased, but a stable and reliable
Using a 40-foot strip microcontroller, easy maintenance and replacement.
All use HT3.96 socket, easy connecting.
3 output ports with indicating, outside device is controled by the relay the directly .
You can control the drive completely isolated.
An external manual interface, it is easy to connect external took control box.
Increase in power since the restoration of insurance to protect your computer.
In order to stabilize, increase 7pcs diode, 10pcs electrolytic capacitor , 7pcs 104 , 1pcs 103, 1pcs 102 capacitor and 2pcs 4700P / 250V capacitor
3. Features and Specifications:
Can run on Windows XP, Vista or Windows 7 (32 -bit or 64-bit PC / laptop USB port (2.x version ) )
Can be used in pulse / direction stepper motor and servo motor drives on the market
Output Input buffer for maximum performance
Advanced interpolation algorithm
You can start, stop , pause, and resume execution of the program on your computer
RS274/NGC G code (EMC2 compatible with standard )
Support for advanced G- code - G40, G41, G42 (tool radius compensation )
Advanced G- code - G43, G49 ( tool length compensation )
Support for advanced G-code - G54, G59.3 ( origin of the coordinate system )
Supports 4 -axis and 3-axis G code
Can import DXF files from the tool path
Can import toolpath from PLT / HPGL files
Can import image files from the tool path
Can use the NC drill file tool path
Can toolpath simulation
Advanced ATC procedures
Automatic tool length measurement
Providing SDK ( Software Development Kit )
Function keys can be defined outside
Foam can be cut
The maximum step frequency 25 kHz
3 digital outputs ( flood , fog , spindle )
The minimum pulse width 12
All axes can be manually
All axes can take the limit
You can control external devices I2C protocol
1 x USB CNC Breakout Board
1 x USB2.0 Cable
We can ship to most countries in the world from our CN warehouses (HK & SZ)
To estimate delivery times to your area, please refer to the table below.
Shipping Delivery Times
|Warehouse||Shipping type||Shipping fee||Estimated shipping time||Note|
|HK/CN||Airmail / EUB||Free||
7-15 business days(EUB)
15-30 business days
Order processing time :2-7 working days
|DHL||Calculated Automatic||3-5 business days|
|Registered airmail||$2||15-30 business days|
|EMS/UPS||---------||7-15 business days|