200W Spindle Motor
Note: Includes 3.175mm chuck, high speed and low noise, suitable for engraving PCB, acrylic, drilling, etc.
Spindle motor: DC motor
Working voltage: 12-48VDC
Speed: 3000-12000r/min (12V-3000 rpm, 24V-6000 rpm, 36V-9000 rpm, 48V-12000 rpm)
Insulation resistance: >2 megohms
Insulation dielectric strength: 400V
Length of the chuck part: 35mm of the shank (including nut and core 43mm)
The diameter of the chuck part is: 16mm
Total length of motor: 140mm (including clamping part and motor)
Spindle net weight: 0.7KG
The radial runout of the main shaft is about 0.02-0.05mm.
Can be used to engrave materials such as metal or non-metal.
48V 200W/300W air-cooled spindle motor power supply
Input voltage: AC110V/ 220V 50/60HZ, switchable, universal
Output voltage: DC 0-48V continuously adjustable. Voltage adjustable, current is not adjustable
Output power: power 360W (48V 7.5A)
Heat dissipation method: with temperature-controlled cooling fan (the internal temperature of the switching power supply is automatically turned on above 55 degrees, and is turned off below 55 degrees).
Speed regulation mode: stepless speed regulation is realized by potentiometer.
Speed range: 0-100%
Power net weight: 0.95KG
Power supply size: length 215mm * width 115mm * height 50mm
1 x 200W Spindle Motor
1 x Fixed Base
1 x Power Supply (speed adjustable)